6lb powdered Alkaline OXYBLASTER Tile Grout Cleaner
1.5 oz makes 1-gallon NEW and Improved Ultra Concentrated - makes over 64 gallons ready to use Pre-Spray
-
6LB OxyBlaster for cleaning Tile Grout - Natural Stone - Concrete - Carpets
-
NEW and Improved Ultra Concentrated - makes over 64 gallons ready to use Pre-Spray
-
Tile Grout - Natural Stone - Concrete - Carpets
Gets the job done faster with concentrated balance of surfactants and oxygen bleach. Made exclusively for carpet cleaning machines that are now being used for hard surface cleaning. Formulated by Dr. Aziz, PhD Chemist, and field tested by veteran carpet cleaners. Ultra Concentrated.
DIRECTIONS:
-
In pump–up sprayer use 1.5 oz to a gallon - makes over 64 gallons Pre-Spray from a 6lb jar
-
In hydroforce use 18 oz.
Give it 5 to 15 minute dwell time
-
For natural stones, if the stains are deep inside give it 15 minute dwell time so Oxy-Blaster has time to get absorbed and bleach the stains that have migrated inside
-
As a booster for carpets add 2 oz in pump-up sprayer, and 4 to 8 oz in hydroforce in addition to your regular pre-spray.
pH 12.
-
Alkaline based
Very Safe - Oxy-Blaster is not a bleach that causes damage when used in a proper dilution.
For all types of Tile and Grout: • Clean Man Made tiles: Ceramic, Porcelain & Quarry Tile • Natural Stones - Marble, Granite, Travertine, Slate and Terrazzo • Limestone and Sand Stone - Clay stone Saltillo, and terra cotta • Grout - Cementious and epoxy
Safe For all types of Carpets use as a booster