Overhaul Concrete, Stone and Tile Cleaner - Case of 4 Gallons
Low odor, low foaming and superior degreasing alkaline formulation removes stubborn soils from hard surfaces and grout lines.
Mix 32 oz. (946 mL) of concentrate with enough water to make 1 gal. (3.8 L) of ready to use (RTU) solution. Preinspection: Examine the surface for evidence of pre-existing damage and for stains and soiling that will not be possible to remove. Check for and remove any coatings. These coatings will interfere with proper cleaning. Work Process: 1) Post wet floor signs. Protect areas not being cleaned from overspray. 2) If the surface has extensive scale or rust staining, pretreat using Versaclean Facelift Concrete, Tile and Grout Brightener. Follow the label directions for this product. 3) Use a pressure sprayer to apply RTU solution to the surface. Use a coarse spray and do not generate aerosol. Allow a 5 - 10 minute dwell time but do not allow solution to dry on the surface. 4) For floors use a rotary buffer with a nylon grit brush to agitate surface. For countertops and vertical surfaces use a hand brush to agitate the surface. 5) Use high pressure water at as high a temperature as possible to pressure wash the surface. Be sure to vacuum all waste water. Inspect surface for standing water and remove. 6) Establish good drying conditions. CAUTION FOR APPLICATION: 1) Test surfaces for compatibility before use. 2) Product is alkaline. Avoid contact with alkaline sensitive surfaces such as aluminum.
- Overhaul alkaline hard surface cleaner 76-242
- Mfr. by Versaclean
- Case of 4-Gallons
- Ratio mix 32 ounces of concentrate to 3/4 gallon of water
- Hard surface Tile and Grout Cleaner for all marrble, ceramic, stone floors (avoid using on Aluminum, linoleum, VCT or Vinyl)